How to Apply Longboard Grip Tape

Posted in by admin on January 18th, 2012

The things that are required to apply grip tape to your longboard involve: Skateboard Deck, Skateboard Grip tape, File, by using a Razor Blade or Box Cutter. These steps for the application of tape are: sector 9 longboard skateboards • Remove all traces of visible paper on the back of the grip tape. This will leave you the sticky area. •In order to protect your hands from the tape, use a piece of the backing paper to hold the tape surface. •Slice the grip tape slightly greater than the board by analyzing its midpoint. You can let the grip tape hang on a bit in the focal area of the board. This would ensure that the center would stick first. As soon as the midpoint has been stuck, ensure that you carefully stick on the edges and this should be done from the center outwards. Because this is really sticky, remember that you have to handle this very carefully. loaded longboard skateboards •You can use the metal end of the screwdriver or maybe a metal file scratch the outer part on the longboards’ deck. Ensure that you rub firmly till the time all the grains are vanished. To pinpoint the boards’ limits, you require to make certain that the white line is visible inside the grip tape. •Using a cutter or razor blade, you position this 45 degree and cut upward to remove excess grip tape. You need to make sure that you begin on the tail or now. After you’ve completed this, move along the white outline and go the blade along the sides to cut added grip tapes. loaded longboard •You may make use of the metal file to amount all irregular edges just concerning the sides from the longboard.•Lastly, make use of a screwdriver in order to push holes all the way through the grip tape wherever the trucks would be accumulated.